5.09 Beta Available (latest version 5.10 RC)

Listing issues addressed in beta version 5.09
Craig@Invincea
Sandboxie Support
Sandboxie Support
Posts: 3523
Joined: Thu Jun 18, 2015 3:00 pm
Location: DC Metro Area

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Craig@Invincea » Sun Mar 06, 2016 5:18 pm

Thanks for the update! It's becoming exceedingly rare as Tom works on it. But other things can trigger it as it can unfortunately also be a generic error.

Dun
Posts: 353
Joined: Mon Jun 23, 2014 5:00 am
Location: Poland

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Dun » Sun Mar 06, 2016 5:50 pm

Maybe my 5 years old netbook is too slow to trigger it with 5.10 :D
Sandboxie 5.27.1 personal lifetime license user || Win10 x64 Pro b17134 (up to date) || ESET IS 11+ x64 || Google Chrome 69+ x64 || UAC on

DS78
Posts: 14
Joined: Fri Sep 05, 2014 10:13 pm

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by DS78 » Tue Mar 08, 2016 8:56 pm

Just updated both Firefox (laptop) and Cyberfox to v45.0 and started receiving the following error in both:

The exception Breakpoint
A Breakpoint has been reached
(0x8000003) occurred in the application 0xf1103273.

Plug-in related? Flash related?

edit: End User fault probably. I had web browsers configured in EMET also I deleted the config in EMET and problems went away. Possible Software Compatibility issue? Also I first tried switching to Flash Beta 21 but that didn't work.

edit2: So much for what I edited earlier. Plug-in container and Breakpoint error are back. The breakpoint error is the same just the hex value for the application changes pretty much each time.

Win7 x64 || Cyberfox ||MS Security Essentials || Malewarebytes (active protection) || EMET 5.5 || (laptop the same except: Win7 x86 and Firefox)

Craig@Invincea
Sandboxie Support
Sandboxie Support
Posts: 3523
Joined: Thu Jun 18, 2015 3:00 pm
Location: DC Metro Area

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Craig@Invincea » Wed Mar 09, 2016 11:21 am

I'd disable EMET. And then see what happens.

DS78
Posts: 14
Joined: Fri Sep 05, 2014 10:13 pm

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by DS78 » Wed Mar 09, 2016 12:11 pm

Yes that did it it was an EMET process configuration.

Craig@Invincea
Sandboxie Support
Sandboxie Support
Posts: 3523
Joined: Thu Jun 18, 2015 3:00 pm
Location: DC Metro Area

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Craig@Invincea » Wed Mar 09, 2016 12:37 pm

Sometimes just disabling an AV program isn't good enough and it causes unexpected issues. Sometimes it takes a removal to see exactly what it could be Kaspersky is one example as well as Norton.

EMET hasn't been tested.

DS78
Posts: 14
Joined: Fri Sep 05, 2014 10:13 pm

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by DS78 » Wed Mar 09, 2016 12:46 pm

Must be on my end with the Mitigation Toolkit config. I've reset it to recommended settings for now and all is good. I apologize for any confusion and my thanks to you and the teams work on a great product.

Craig@Invincea
Sandboxie Support
Sandboxie Support
Posts: 3523
Joined: Thu Jun 18, 2015 3:00 pm
Location: DC Metro Area

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Craig@Invincea » Thu Mar 10, 2016 3:08 pm

DS78 wrote:Must be on my end with the Mitigation Toolkit config. I've reset it to recommended settings for now and all is good. I apologize for any confusion and my thanks to you and the teams work on a great product.
Good to know! Thanks for the update!

Syrinx
Sandboxie Guru
Sandboxie Guru
Posts: 621
Joined: Fri Nov 13, 2015 4:11 pm

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Syrinx » Thu Mar 10, 2016 6:27 pm

Been a while so I figured I'd drop an update about my lingering programs issue. I rewrote my rules (well a lot of copy and pastes/alterations) removing the multiple templates entirely and instead using one large template for every single box with specific (!) exclusions and a few <ProcessGroups> pooled from multiple boxes in the GlobalSettings and I am no longer having any lingering sbie programs! I still find it odd that using multiple templates this way would cause anything to linger but at least it's been worked around and now my ini is a few KBs smaller as an added bonus!
https://www.ntlite.com

Craig@Invincea
Sandboxie Support
Sandboxie Support
Posts: 3523
Joined: Thu Jun 18, 2015 3:00 pm
Location: DC Metro Area

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Craig@Invincea » Fri Mar 11, 2016 8:57 am

Syrinx wrote:Been a while so I figured I'd drop an update about my lingering programs issue. I rewrote my rules (well a lot of copy and pastes/alterations) removing the multiple templates entirely and instead using one large template for every single box with specific (!) exclusions and a few <ProcessGroups> pooled from multiple boxes in the GlobalSettings and I am no longer having any lingering sbie programs! I still find it odd that using multiple templates this way would cause anything to linger but at least it's been worked around and now my ini is a few KBs smaller as an added bonus!
Whoa. Thanks for the hard work and the update. Intriguing to say the least.

Mr.X
Posts: 602
Joined: Sat Jul 13, 2013 9:34 am
Location: Mexico

Re: 5.09 Beta Available (latest version 5.10 RC)

Post by Mr.X » Fri Mar 11, 2016 9:39 am

Syrinx wrote:Been a while so I figured I'd drop an update about my lingering programs issue. I rewrote my rules (well a lot of copy and pastes/alterations) removing the multiple templates entirely and instead using one large template for every single box with specific (!) exclusions and a few <ProcessGroups> pooled from multiple boxes in the GlobalSettings and I am no longer having any lingering sbie programs! I still find it odd that using multiple templates this way would cause anything to linger but at least it's been worked around and now my ini is a few KBs smaller as an added bonus!
Thanks a lot! :wink:
Windows 8.1 x64 EN | Sandboxie latest beta or stable | All software latest versions unless stated otherwise

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest